BB (Big Boy) Scriber
Overview of the BB Scriber
The BB Scriber along with the UBB Scriber is the largest scriber in the range.
The BB Scriber uses a barrel nut so it can hold the deluxe and standard marking wheel holders, a metal scribe or a pencil.
The big boy scriber is a larger version of the deluxe FB Scriber. If you don’t need the reach of the BB Scriber but you would like the option to hold a metal scribing device now or in the future the deluxe FB or SB Scribers are the right option for you.
This image shows the BB Scriber working with a metal scribe using the front lip as a guide.
It has the same footprint as the FB Scriber (64mm x 25.4mm), but is taller (53mm).
The marking tool can be held above or below the pivot point giving you more options for the angle the marking tool is presented to the work piece.
To change from the over to under positions remove the pivot bolt and flip the body 180 degrees.
Re position the threaded dowel and insert the brass spacer before the thumbscrew (or store it in the hole provided in the body if it’s not needed).
In this image the BB Scriber on the left is holding a pencil above the pivot point.The BB Scriber on the right is holding a metal scribe below the pivot point.
This cross section view of the BB Scriber shows how the marking tool can be held above or below the pivot point.
Note this image shows the thumbscrews in position for both above and below the pivot point.
The brass spacer is shown in use with the scriber below the pivot point, it is also shown in its storage position .
Both the UBB and BB Scribers have extra holes allowing the body to be mounted further up the aluminium cradle increasing the span of the scriber from 1mm to a maximum of 90mm with a pencil and 75mm with the marking wheel holder.